Alex Sunandar - Point To Point

 

Setting Mikrotik  Point To Point

Langkah - langkah setting Mikrotik Point-to-point

 Setting Wlan1 Sisi A

1. Berikan Nama pada Wlan1 (wireless).
    [alex@ApPowerH-Omni] > interface wireless set wlan1 radio-name=AP coba-coba

2. Rubah Mode Wlan1menjadi bridge
    [alex@ApPowerH-Omni] > interface wireless set wlan1 mode=bridge

3. Berikan Nama SSID coba-coba.
    [alex@ApPowerH-Omni] > interface wireless set wlan1 ssid=Coba-Coba

3. Setting Band frekuensi yang di gunakan saat ini kami menggunakan band= 2.4 ghz-b/g gratis
     [alex@ApPowerH-Omni] >interface wireless set wlan1 band=2.4ghz-b/g

Setting Bridge

1. Tambahkan interface Bridge dan berinama "bridge1"
    [alex@ApPowerH-Omni] > interface bridge add name="bridge1"
2. Tambahkan Port bridge wlan1 dan eth1
    [alex@ApPowerH-Omni] > interface bridge port add interface=ether1
    [alex@ApPowerH-Omni] > interface bridge port add interface=wlan1
 
Setting IP address

1. [alex@ApPowerH-Omni] > ip address add address=192.168.1.10/30  interface=wlan1
    [alex@ApPowerH-Omni] > ip address add address=192.168.1.10/24  interface=ether1


Setting Wlan1 Sisi B

1. Berikan Nama pada Wlan1 (wireless).
    [alex@ApPowerH-Omni] > interface wireless set wlan1 radio-name=AP coba-coba

2. Rubah Mode Wlan1menjadi bridge
    [alex@ApPowerH-Omni] > interface wireless set wlan1 mode=station

3. Berikan Nama SSID coba-coba.
    [alex@ApPowerH-Omni] > interface wireless set wlan1 ssid=Coba-Coba

3. Setting Band frekuensi yang di gunakan saat ini kami menggunakan band= 2.4 ghz-b/g gratis
     [alex@ApPowerH-Omni] >interface wireless set wlan1 band=2.4ghz-b/g

Setting Bridge

1. Tambahkan interface Bridge dan berinama "bridge1"
    [alex@ApPowerH-Omni] > interface bridge add name="bridge1"
2. Tambahkan Port bridge wlan1 dan eth1
    [alex@ApPowerH-Omni] > interface bridge port add interface=ether1
    [alex@ApPowerH-Omni] > interface bridge port add interface=wlan1
 
Setting IP address

1. [alex@ApPowerH-Omni] > ip address add address=192.168.1.11/30  interface=wlan1
    [alex@ApPowerH-Omni] > ip address add address=192.168.1.10/24  interface=ether1


Setting eoip-tunnel disemua sisi Acces Point
1. Masukan IP Address sisi B di dalam AP sisi A dan Sebaliknya.





Today, there have been 1 visitors (10 hits) on this page!
=> Do you also want a homepage for free? Then click here! <=