Alex Sunandar - AP Bridge

 

Setting Mikrotik  Acces Point Bridge.

Langkah - langkah setting Mikrotik AP Bridge :

 Setting Wlan1

1. Berikan Nama pada Wlan1 (wireless).
    [alex@ApPowerH-Omni] > interface wireless set wlan1 radio-name=AP PowerH-Omni

2. Rubah Mode Wlan1menjadi AP bridge
    [alex@ApPowerH-Omni] > interface wireless set wlan1 mode=ap-bridge

3. Berikan Nama SSID coba-coba.
    [alex@ApPowerH-Omni] > interface wireless set wlan1 ssid=Coba-Coba

3. Setting Band frekuensi yang di gunakan saat ini kami menggunakan band= 2.4 ghz-b/g gratis
     [alex@ApPowerH-Omni] >interface wireless set wlan1 band=2.4ghz-b/g

Setting Bridge

1. Tambahkan interface Bridge dan berinama "bridge1"
    [alex@ApPowerH-Omni] > interface bridge add name="bridge1"
2. Tambahkan Port bridge wlan1 dan eth1
    [alex@ApPowerH-Omni] > interface bridge port add interface=ether1
    [alex@ApPowerH-Omni] > interface bridge port add interface=wlan1

Today, there have been 1 visitors (2 hits) on this page!
=> Do you also want a homepage for free? Then click here! <=